LW180KV


LW180KV

Request for price quote

Name
Field is required!
Field is required!
E-mail
Field is required!
Field is required!
Phone/Mobile
Field is required!
Field is required!
Message
Field is required!
Field is required!
SKU: LW180KV Category:

Description

On the basis of keeping the appearance style and advantages of the former K series loader, LW180KV wheel loader is upgraded in such aspects as emission, reliability, comfort and convenience in maintenance. the wheel loader is provided with fully hydraulic steering. Multiple types of working mechanisms (standard arm and high dumping arm) and auxiliary units (quick-charging bucket, pallet fork, grass clamp, wood clamp etc.) are optional.

Time interval to change hydraulic oil is extended to 3,000h, which is far beyond the industrial level and can bring about a large reduction in user’s cost. Long wheel base (2,300mm) is adopted and applicable to all kinds of over-weighted operating conditions, featuring an industry-leading stability. Rapid and efficient, running speed up to 28km/h, the best in the industry. Different dumping heights (2,680-2,970mm) can be configured to meet requirements on various operating conditions.Hydraulic piloting, FOPS and ROPS cabs, air conditioning, speaker etc. are optional to provide user with a comfortable operation and safe driving. Double seals of 24° cone + seal ring are adopted for joint, featuring a better tightness and a higher reliability of performance; Motor supplied by Yto (Luoyang) (China III) has a compact and reliable structure, with an economical electronic unit pump, featuring a low overall noise, a good heat dissipation effect of motor oil and a high efficiency, so this motor can achieve the purposes of saving energy and protecting environment in the true meaning. After CAE analysis, it is found out that working mechanisms can realize effective spading under heavy loads and the buckets with special design can be inserted into the material piles more easily. Service life of bucket can be significantly extended by use of wear-resistant materials.

Performance parameters

Rated bucket capacity: 1.1m3
Operating mass 6350kg
Rated working load: 1400-1800kg
Dumping height 3175-3775mm
Dumping reach 920-1510mm
Overall length 7045mm
Overall height 2060mm
Bucket width 2950mm
Engine power: 58.8kw 2400RPM